Solid Rubber

Solid rubber profile D/5
The rubber profiles D/5 allow a clean and exact cut edge on the corrugated board and also prevent any cracking of the upper cover liner.
The colour-coded profiles have been specially developed for use on perforating lines, cutting lines and cutting-creasing combinations.

Description | Hardness | Dimensions (L × B × H1/H2) |
Unit | Order no. |
---|---|---|---|---|
* Also available in a self-adhesive version: CITO solid rubber profile D/5 EasyFix |
||||
Note: The indicated Shore A hardnesses can vary slightly. | ||||
* D/5 ROSE | 70 Shore A | 700 × 5 × 6/5 mm | 100 strips | BPB00304 |
* D/5 YELLOW | 70 Shore A | 700 × 5 × 7/6 mm | 100 strips | BPB00303 |
* D/5 BROWN NEW | 70 Shore A | 700 × 5 × 8/7 mm | 100 strips | BPB00306 |
* D/5 PURPLE NEW | 70 Shore A | 700 × 5 × 8.5/7.5 mm | 100 strips | BPB00307 |
* D/5 ORANGE | 70 Shore A | 700 × 5 × 9/8 mm | 100 strips | BPB00300 |
* D/5 GREEN | 70 Shore A | 700 × 5 × 9.5/8.5 mm | 100 strips | BPB00301 |
* D/5 FUCHSIA | 70 Shore A | 700 × 5 × 10/9 mm | 100 strips | BPB00302 |
D/5 SAND NEW | 70 Shore A | 700 × 5 × 11/10 mm | 100 strips | BPB00309 |
* D/5 BLUE | 70 Shore A | 700 × 5 × 12/11 mm | 100 strips | BPB00305 |
Recommendation
We recommend the various D5 profiles for optimum cutting results in flat-bed applications, in accordance with the desired wood thickness and application purpose.
wood thickness | colour | application | overlap |
---|---|---|---|
18 mm | Pink | Cutting/creasing and perforating rules | 0.2 mm |
Yellow | Cutting rule | 1.2 mm | |
15 mm | Orange | Perforating rules | 0.2 mm |
Green | Combination cutting/creasing rule | 0.7 mm | |
Fuchsia | Cutting rule | 1.2 mm | |
12 mm | Blue | Cutting rules and perforating rules | 0.2 mm |
Using the D5 solid rubber profile serves to compress the corrugated board during the diecutting process prior to the cutting procedure. As a result, the inner liner (corrugations) lies flat between the outer covers, thus creating a cleanly cut edge. The required D5 height can be influenced by several factors, such as material quality or diecutting pressure. Our recommended application should therefore be merely seen as a suggestion.
Should you have any questions, please feel free to contact us at any time
.
Solid rubber profile A/1
Rubber profile, especially for rubber lining on the perforating and combination rules.

description | hardness | dimensions (L × B × H) |
unit | Order No. |
---|---|---|---|---|
Solid rubber profile A/1 | 60 Shore A | 700 × 10 × 10 mm | 100 strips | BPB00137 |
Solid rubber profile B/2
Rubber profile, especially for rubber lining on the creasing rule.

description | hardness | dimensions (L × B × H) |
unit | Order No. |
---|---|---|---|---|
Solid rubber profile B/2 | 60 Shore A | 700 × 12.5 × 6.5 mm | 100 strips | BPB00139 |
Solid rubber profile B/2 | 60 Shore A | 700 × 12.5 × 7.0 mm | 100 strips | BPB00140 |
Solid rubber profile B/2 | 60 Shore A | 700 × 12.5 × 7.5 mm | 100 strips | BPB00141 |
Solid rubber creasing profile C/3
The solid rubber creasing profile C/3 is also equipped with a spacer block to allow the use of a creasing matrix which produces unbeatable results when creasing along the flute.

description | hardness | dimensions (L × B × H) |
unit | Order No. |
---|---|---|---|---|
Solid rubber creasing profile C/3 | 60 Shore A | 700 × 12.5 × 7.0 mm | 100 strips | BPB00111 |