CITO Easyfix

Perfection, fast and simple

Innovation from

DieFutureGroup

The perfection of your diemaking is our concern – so raise your productivity, reduce your costs and increase your work protection with CITO EasyFix.

CITO now presents EasyFix, the new family of self-adhesive profiles that allow you to equip your cutting dies quickly and precisely. EasyFix was developed especially for diemaking, to withstand the loads that arise during the die-cutting process.

 

EasyFix Zeitersparnis

Save up to 70 % of your time

Using EasyFix profiles means you no longer need to perform the complex activities involved in conventional adhesion and positioning. As a result, you save valuable time – practical tests have indicated a time saving of up to 70 % in rubber-lining your dies.

Your customers too can profit from the use of EasyFix profiles on the cutting die, because neither removal of the rubber lining nor changing blades result in the familiar damage to the cutting dies.

Liquid adhesives impair the operation of the rubber lining. The use of EasyFix profiles guarantees the flawless performance of your discharge materials. The absence of liquid adhesive also has a positive impact on work and environmental safety by protecting both your employees and the environment from the effects of solvent vapours.

 

Benefits to you at a glance

  • ✓ Time saving brought about 70% by fast, simple and precise attachment of profiles
  • ✓ No damage to cutting die surfaces
  • ✓ 100% efficiency of rubber lining
  • ✓ Increase in work safety
  • ✓ Increased customer satisfaction

 

 

CITO FAST Rubber EasyFix

CITO FAST Rubber EasyFix

FAST Rubber EasyFix
description hardness dimensions
(L × B × H)
unit Order No.
FAST Rubber 70 Shore A 700 × 8.0 × 7.3 mm  100 strips BPB01212
FAST Rubber 70 Shore A 700 × 5.0 × 7.3 mm 100 strips BPB01205
FAST Rubber 70 Shore A 700 × 8.5 × 9.5 mm  100 strips BPB01228
FAST Rubber 70 Shore A 700 × 5.0 × 9.5 mm 100 strips BPB01229

 

 

CITO Solid rubber profile D/5 EasyFix

Vollgummi-Profil D/5 EasyFix

Vollgummi-Profil D/5 EasyFix
Description Hardness Dimensions
(L × B × H1/H2)
Unit Order no.
Note: The indicated Shore A hardnesses can vary slightly.
D/5 ROSE 70 Shore A 700 × 5 × 6/5 mm 100 strips BPB01304
D/5 YELLOW 70 Shore A 700 × 5 × 7/6 mm 100 strips BPB01303
D/5 BROWN 70 Shore A 700 × 5 × 8/7 mm 100 strips BPB01306
D/5 PURPLE NEW 70 Shore A 700 × 5 × 8.5/7.5 mm 100 strips BPB01307
D/5 ORANGE 70 Shore A 700 × 5 × 9/8 mm 100 strips BPB01300
D/5 GREEN 70 Shore A 700 × 5 × 9.5/8.5 mm 100 strips BPB01301
D/5 FUCHSIA 70 Shore A 700 × 5 × 10/9 mm 100 strips BPB01302
D/5 BLUE 70 Shore A 700 × 5 × 12/11 mm 100 strips BPB01305

 

 

CITO Cushion Crease EasyFix

Cushion Crease EasyFix

CITO PROfile CUSHION CREASE Cushion Crease Spule
Note: The indicated Shore A hardnesses can vary slightly.
description hardness dimensions
(B × H)
colour unit Order No.
Cushion Crease 70 Shore A 16.5 × 6.4 mm yellow 1 roll / 20 m BPB01242
Cushion Crease 70 Shore A 17.0 × 7.0 mm green 1 roll / 20 m BPB01243
Cushion Crease 70 Shore A 17.5 × 7.5 mm gold 1 roll / 20 m BPB01253
Cushion Crease 70 Shore A 18.0 × 8.0 mm blue 1 roll / 20 m BPB01244
Cushion Crease 70 Shore A 18.5 × 8.5 mm lilac 1 roll / 18 m BPB01251
Cushion Crease 70 Shore A 20.0 × 9.0 mm orange 1 roll / 16 m BPB01245
Cushion Crease 70 Shore A 20.0 × 9.7 mm white 1 roll / 15 m BPB01252
Cushion Crease 70 Shore A 20.0 × 10.0 mm pink 1 roll / 15 m BPB01254

 

Directions for use

 

To guarantee optimum adhesion of your EasyFix profiles, please observe the following instructions:

Surface condition

Before attaching the EasyFix profile, make sure that the surface of your cutting die is dry and free of any dust, oil, separating agent or other soiling.

Surface cleaning

Only clean and lint-free cloths should be used to clean the surface of the cutting die.

Attaching the EasyFix profile

Only clean and lint-free cloths should be used to clean the surface of the cutting die.

Avoid all skin contact with the adhesion surface as this may reduce the adhesive force. Clean the surfaces to be joined. Remove the protective film from the adhesive strip and position it on the surface. Press the EasyFix profile down firmly onto the surface. It is important to apply sufficient pressure to create a good contact between the profile and the cutting, as this is important for good profile bonding.

We would recommend using a mounting tool to ensure maximum adhesion of all profile sections on the cutting die.

Storage

EasyFix profiles can be stored for at least 12 months in the closed carton.

 

Download